Roller Extractor M150 BHO

It does not collect impurities when the GAS circulates inside.

The kit has a 60 micron mesh with a diffuser shape so that the gas that comes out does it as a small sprinkler in order to deposit the extraction in a thin sheet and not to be crowded. The tube has a safety valve that does not allow the introduction of more gas if the tube is obstructed, thus avoiding any risk of explosion.

It also has a filter for waxes much more effective than the typical coffee filter. The tube can be used on both sides allowing to change the position of the inlet and outlet valves in order to perform the extraction on both sides allowing to get more quantity.

This model measures 15cm long in which we can introduce up to 10 grams of grass previously grinded.

- Stainless steel threaded tube
- Union of polyethylene with aluminum thread, gas inlet, adapted for gas bottles on the market.
- Union of stainless steel with aluminum thread of a hole, with mesh for filters for a better impulsion and dragging.

Roller BHO is manufactured for "educational use" not for use for illegal purposes, but as a GAS resin extractor. The handling and use of Roller Extractor should be done in a ventilated place, if possible outdoors, DO NOT SMOKE while handling gas and avoid nearby sources of heat.

Gas is a flammable and dangerous material, its handling should only be done by adults of legal age.

Specifications

- BHO Extractor Roller
- Stainless steel
- 100% PVC free
- Up to 10g of weed
- Length: 15cm
- Width: 2,8cm

Content

- Oil / Resin Extractor by Gas Roller BHO Extractor - 15cm (M150)
- 2x interchangeable nozzles
- 6x filters
- Smoking papers as a gift
- Instructions for use